Product
Solenoid Valve-Normally Closed Type
Product ID: UWF-10~50
PRODUCT DESCRIPTION
．Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃)
CAUTIONS：
．Before pipelining, the pipe line must be very clean without any contaminants or any other things not ought to be existed.
．To prolong the life time of the product, Y-line filter should be installed in the front end of solenoid valve.
．AC voltage tolerance：±10%；DC voltage tolerance：±1%
．It should be installed horizontally；vertical installation is not advisable.
Not Suitalbe For Fluid As Below：
．Liquid status when it is high temperature；solid status when it is cool.
．Corrosive fluid
．Viscosity over 20cst
Contact Detail
| Address: | No.7, Rueiyuan St., Bade Dist., Taoyuan City 334, Taiwan (R.O.C.) |
| FAX: | +886-3-368-0977 |
| Email: | grace377@unid.com.tw,unid@unid.com.tw |
| ZIP: | 33447 |
Hot Products
Pneumatic Actuator
Solenoid Valve
Solenoid Valve-Normally Closed Type
Modulating Electric Actuator
Solenoid Valve-Normally Open Type
Solenoid Valve-Explosion Proof Series
Electric Actuator
-
Pneumatic Actuator
-
Solenoid Valve
-
Solenoid Valve-Normally Closed Type
-
Modulating Electric Actuator
-
Solenoid Valve-Normally Open Type